Wireless Setting; Tcp/Ip Setting; Link Information - TRENDnet TEW-509UB User Manual

W S
IRELESS ETTING
The Wireless Setting pane settings are described below
Current Profile
Reconnect (button)
Network Mode
Security
Authentication
TCP/IP S
ETTING
The TCP/IP Setting pane settings are described below.
IP Address
Subnet Mask
Gateway
DNS Server
IP Release (button)
IP Renew (button)
L I
INK NFORMATION
The Link Information pane settings are described below.The Link Information pane shows the
network status.
SSID
Status
Link Speed
Signal Level
BSSID
Channel
Shows the current profile you have selected. If you have not added a profile,
only Default shows. The settings shown in the Network screen are for the
current profile. Click the drop down arrow to select another profile.
Press to reconnect to the current access point.
Shows the current network mode. Infrastructure or ad-hoc mode.
(See Note below for more information.)
Shows the security status.
Shows the authentication required. No authentication is required if this field
is blank.
Shows the current network IP address.
Shows the current subnet mask status.
Shows the current gateway.
Shows the current network DNS
address.
Click to release the current
Click to renew the
TCP/IP
Shows the current SSID (Service Set IDentifier). This is the name assigned
to a wireless Wi-Fi network. All devices must use this case-sensitive
name in order to communicate.
Shows the current connection status.
Shows the speed of the current connection. Tx is the transmit speed; Rx the
receive speed.
Shows the signal strength of the current connection. (See Tip below for
more information.)
Shows the ID of the current BSS. (See Note below for more information.)
Shows the network channel.
16
settings.
TCP/IP
settings.