Names And Functions Of Parts - JVC LT-32A10BU Instructions Manual

Names and functions of parts

Remote control sensor
Power lamp
ON: Lit
O��: Unlit
When "Power Lamp" is set to "Off", the
Power lamp will not light up.
"Power Lamp" �P. 2�
Handling the glossy finish of the TV
Be careful when handling the glossy finish of the TV
The glossy finish of the TV scratches easily.
Protection films have been pasted onto the glossy finish of the TV to prevent
scratches. Peel off the films after the TV has been placed properly.
If the glossy finish gets dirty, clear the dust off the glossy finish first. Then wipe softly
with a soft cloth. If you do not clear the dust first, or you wipe the glossy finish too
hard, the glossy finish may be scratched.
4
Volume
Change channel /
EXT terminal.
To switch to an external
input, press P repeatedly.
Turn on / off �standby�
the TV.
Headphone jack
�stereo mini jack
3.5mm�
Glossy finish
Attach the stand to the TV
1
2
3
Note
If you face any problem with the stand assembly, please contact your retailer or
authorised dealer.
Screw x 8 provided