Sony DWR-R03D Operating Instructions Manual page 40

Headphone Output
ø6.3 mm (1/4 inch) stereo jack
Other Equipment
Input connector: BNC-R with a 75 Ω
Word Sync
termination switch
Output connector: BNC-R
External Word Sync: 32 kHz to 96 kHz
Wireless Remote Control
Cross Remote (2.4 GHz IEEE802.15.4
compliant)
LAN Connector
RJ-45 modular jack (2)
1000BASE-T: IEEE802.3ab compliant
100BASE-TX: IEEE802.3u compliant
10BASE-T: IEEE802.3 compliant
Dante Digital Audio
Display OLED
General
Power Requirements
AC: 100 V to 240 V, 0.4 A or less
Input (1), Cascade output (1)
Power Consumption
AC: 34 W
Operating Temperature
0 °C to 50 °C (32 °F to 122 °F)
Storage/Transport Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (unit: mm (inches))
Mass Approx. 3.9 kg (8 lb 10 oz) (including
the attached antenna)
Supplied Accessories
Whip antenna (2)
AC power cord
For US models: Part No. 1-551-812-
1x (Sony) (1)
For Europe models: Part No. 1-551-
631-2x (Sony) (1)
Cascading power cord (Part No. 1-912-
652-1x) (Sony) (1)
Plug holder (2)
Foot (4)
Warranty card (US models only) (1)
Before Using This Unit (3)
Operating Instructions (CD-ROM) (1)
Open source software technical
information (CD-ROM) (1)
Design and specifications are subject to change without
notice.
Notes
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT OR
MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT THAT
MAY RESULT DUE TO CIRCUMSTANCES OF
ANY KIND.
Trademarks
All system names, product names, and company names
described in this document are registered trademarks or
trademarks of their respective owners.
The ® and ™ marks are not used in this document.
40