Bosch DHI645FQ Instruction Manual page 8

Cleaning and maintenance
en
Area Cleaning agent
Glass Glass cleaner:
Clean with a soft cloth. Do not use a glass
scraper.
Controls Hot soapy water:
Clean using a damp dish cloth and dry with a
soft cloth/towel.
Risk of electric shock caused by penetrating
moisture.
Risk of damage to the electronics from pene-
trating moisture. Never clean operating con-
trols with a wet cloth.
Do not use any stainless steel cleaners.
Cleaning the metal grease filter
These instructions apply to several appliance variants. It
is possible that individual features are described which
do not apply to your appliance.
:
Warning – Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Notes
Do not use any aggressive, acidic or alkaline
■
cleaning agents.
When cleaning the metal mesh grease filters, also
■
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
The metal mesh grease filters can be cleaned in the
■
dishwasher or by hand.
By hand:
You can use a special grease solvent for
Note:
stubborn dirt. It can be ordered via the Online Shop.
Soak the metal mesh grease filters in a hot soapy
■
solution.
Clean the filters with a brush and then rinse them
■
thoroughly.
Leave the metal mesh grease filters to drain.
■
In the dishwasher:
If the metal mesh grease filters are cleaned in the
Note:
dishwasher, slight discolouration may occur. This has
no effect on the function of the metal mesh grease
filters.
Do not clean heavily soiled metal mesh grease filters
■
together with utensils.
Place the metal mesh grease filters loosely in the
■
dishwasher. The metal mesh grease filters must not
be wedged in.
8
Removing metal grease filter
Pulling out the filter drawer
1.
Push the lock and push the metal grease filter
2.
backwards and pull downwards.
While doing this, place your other hand under the
metal grease filter.
To avoid causing damage, do not bend the
Note:
metal grease filters.
Take the metal grease filter out of the holder.
3.
Grease may accumulate in the bottom of the
Note:
metal grease filter. Hold the metal grease filter level
to prevent grease from dripping out.
After removing the metal grease filters, clean the
4.
inside of the appliance.
Clean the metal grease filters and let them dry
5.
before re-fitting them.
Installing the metal mesh grease filter
Insert the metal mesh grease filter.
1.
While doing this, place the other hand under the
metal mesh grease filter.
Fold the metal mesh grease filter upwards, locking it
2.
in place.
Changing the activated charcoal filter (only
in circulating-air mode)
In order to guarantee efficient odour filtration, the filter
must be serviced regularly.
The activated charcoal filters must be replaced at least
every 4 months.
Notes
The activated charcoal filters are not included in the
■
delivery. The activated charcoal filters can be
obtained from specialist retailers, from our after-
sales service or from the Online Shop.
The activated charcoal filters cannot be cleaned or
■
reactivated.
Remove the metal grease filters.
1.
Turn the old activated charcoal filter and pull away
2.
from the holder. ¨
Push the new activated charcoal filter onto the
3.
holder and turn. ©
Fit the metal grease filters.
4.