Table of Contents
Advertisement
LOCATION
When positioning the heater, the main variables governing the
location are Flueing and Warm Air Distribution.
This heater must not be installed where curtains or other
combustible materials could come into contact with it. In some
cases curtains may need restraining. Refer to "Operational
Safety Warnings" starting on page 7 for additional safety
considerations.
Horizontal and vertical clearances are measured
from the edge of the burner box glass.
IMPORTANT
Mantles and surrounds can be added to compliment the
design provided that they conform to the following clearances
requirements.
The minimum clearance from the nearest edge of the burner
wire guard is 150 mm. The depth of the mantle or surround (A)
at this minimum clearance may not exceed 150 mm.
An additional 100 mm of clearance is required for every extra
50 mm of mantle depth. The depth of the mantle or surround (B)
at 400 mm of clearance may not exceed 200 mm.
Ensure that the area in which the appliance is installed has
adequate fixed ventilation, this fixed ventilation must be provided
as detailed in AS/NZS 5601.1.
Combustion product spillage testing must be conducted
during appliance commissioning.
NOTE
show a need for additional fixed ventilation and/or
correct adhesive foam strip sealant fitment.
TV & ORNAMENTATION WARNING
INSTALLATION OF TV OR ORNAMENTATION ABOVE THE HEATER
The installation of electrical appliances above and in the vicinity of the heater such as, but not
CAUTION
limited to, Plasma TV, LCD TV, Home Theatre Screens, Speakers, etc must comply with their
manufacturers' instructions.
It is the responsibility of the installer/end-user to check the installation instructions of these
items and to ensure the location is suitable.
This caution also extends to, but is not limited to, ornaments such as: Paintings, Prints,
Photographs, Tapestries, Mirrors, Stuffed Animals, etc.
Please note the recommended clearances as per the diagram above.
The temperature of the wall surface directly above the appliance may be elevated and may
discolour paint finishes or distort vinyl wall coverings. For durability of surfaces you should
contact the relevant manufacturer for their specification.
RINNAI DOES NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE OCCURRING
TO ANY ITEMS INSTALLED ABOVE AND IN THE VICINITY OF THE HEATER.
WARNING
Use either a shelf or mantle below the TV or ornament or alternately you can construct a recess
to mount TV or ornament in.
IDEA
Check the manufacturers installation instructions for these items and ensure the recess is
suitable.
Rinnai
This testing may
17
INSTALLATION INSTRUCTIONS
m m
0 0
1 0
REH281 - SPECTRUM 28 OIM
m m
0 0
= 2
B
m m
5 0
= 1
A
Hide quick links:
Advertisement
Table of Contents
