Advertisement
Assembly / Operating Instructions
Canopy functions
1.
Pull the canopy cover forward or push backward.
2.
Pull out the visor as per image for the sun visor function.
CAUTION: The canopy must be fully closed before folding the
stroller
12
Assembly / Operating Instructions
Restraints - Harness
1.
To secure the child in the harness, place left
hand buckle prong (b) on top of (a).
2.
Hold both left hand buckle prongs (a) and (b)
together and insert it into buckle housing (e)
until it snaps into position.
3.
Repeat previous steps for right hand buckle
prongs (c) and (d).
4.
Once all attached, carefully adjust the harness
straps by pulling each slider (f) until the desired
fit is achieved in the lap, shoulder and crotch
straps.
5.
To release the buckles, squeeze the top and
bottom prongs (a) and (b), (c) and (d) together
until harness disengages.
CAUTION: Always adjust the harness when
changing the seating position of the child.
To adjust the seat extension
1.
Lower the seat extension by squeezing the bar located
underneath the foot rest. By squeezing this bar, it will release the
footrest. Push down gently on the footrest to lower.
2.
Raise the seat extension by squeezing the bar and lifting up until
the release latches lock into place.
f
f
a
c
f
f
b
d
e
f
(a), (b): Left hand buckle prongs
(c), (d): Right hand buckle prongs
(e): Buckle housing
(f): Strap adjustment sliders
13
Advertisement
