Related Manuals for Childcare Dupo Cinder 019113-384
Summary of Contents for Childcare Dupo Cinder 019113-384
- Page 1 Dupo Twin Stroller “Cinder” Model # 019113-384 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Read all instructions before assembly and use of the stroller / pram. Keep instructions for future use. WARNING TO AVOID INJURY OR DEATH: FOLLOW THE MANUFACTURER’S INSTRUCTIONS. ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY. USE THE TETHER STRAP AT ALL TIMES TO PREVENT THE STROLLER ROLLING AWAY. DO NOT LEAVE CHILDREN UNATTENDED. - Page 3 CONGRATULATIONS Congratulations on your purchase of the Dupo Twin Stroller “Cinder” This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 4 Supplied loose in box: Bumper Bar Front Dual Swivel Wheels Stroller Frame (Pre-Assembled) • Five Point Safety Harness Rear Wheels • Storage Basket • Shoulder Pads • Hood There are no accessories recommended for use with this Childcare Dupo Twin Stroller.
- Page 5 ASSEMBLY / OPERATING INSTRUCTIONS To unfold Stroller... Release the folding lock as shown in image. Lift handle and seat apart until the frame ‘clicks’ and locks on both sides. Ensure stroller is locked on both sides before continuing. WARNING ENSURE CHILDREN STAY CLEAR WHEN UNFOLDING/FOLDING THE STROLLER. To attach Front Swivel Wheels...
- Page 6 ASSEMBLY / OPERATING INSTRUCTIONS To remove Front Swivel Wheels... Press button on the top of the wheel housing. Pull the wheel downwards to release from housing. Repeat for other Front Swivel Wheel. To operate Swivel Function... To lock swivel wheels, slide lever downwards until it ’clicks’.
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To attach Rear Brake Housings... Slide brake housing on to rear leg until secure. Make sure that the pop-pin is visible in the housing. Repeat for other side. To use Rear Brake... To lock rear wheels, push down on the rear red brake pedal on the rear wheel housing with foot.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To attach Rear Wheels... Lift the rear of the stroller slightly upwards. Insert the rear wheel axle into the housing until it clicks into place. Pull wheel outwards to check it is secure. Repeat for other Rear Wheel. To adjust Backrest (5 positions)...
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To attach Canopy... Slide outer hood adjusters onto the outer mounting blocks until they lock into place. Slide the inner hood adjusters onto the mounting block one at a time until they lock into place. To adjust Canopy... To open, pull canopy forward until extended.
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To adjust Viewing Window... To open, lift viewing window flap forward. To close, lower back into place and flap will secure with magnets. To adjust Sun Visor... To open, lift out from front of hood. To close, push back.
- Page 11 ASSEMBLY / OPERATING INSTRUCTIONS Restraints - Harness... To secure the child in the harness, place left hand buckle prong (b) on top of (a). Hold both left hand buckle prongs (a) and (b) together and insert it into buckle housing (e) until it snaps into position. Repeat previous steps for right hand (a), (b): Left hand buckle prongs buckle prongs (c) and (d).
- Page 12 ASSEMBLY / OPERATING INSTRUCTIONS To adjust Waist Strap... To loosen waist strap, push up both top and bottom Top strap straps through buckle as circled in diagram. To place waist strap in desired position, slide the Bottom bottom strap into position then pull the top strap and strap tighten into position.
- Page 13 ASSEMBLY / OPERATING INSTRUCTIONS To attach Bumper Bar continued..To remove, push release button on inside of mountings and pull bar outwards. To adjust Footrest (3 positions)... To adjust the footrest, press both buttons located at the pivot point of the footrest as shown. Once both buttons are depressed manually adjust the footrest to the desired position.
- Page 14 ASSEMBLY / OPERATING INSTRUCTIONS To fold Stroller continued... Push button on plastic barrel of handle while twisting barrel forward. Continue pushing downwards until the stroller is folded. Ensure folding lock is engaged.
-
Page 15: Maintenance
HOW TO CARE FOR YOUR CHILDCARE STROLLER Cleaning To ensure the long-lasting use of your stroller, dry it with a soft absorbent cloth after use in rainy weather. Use a damp cloth to clean the frame. Do not use abrasive cleaners. After using your stroller on the beach, clean the frame and wheels thoroughly with water to remove the sand and salt. - Page 16 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 82 Maribyrnong Street, Footscray, VIC, 3011 Distribution Customer Service 1300 667 137 2-6 Argyle St, Morningside, PO Box 41-014, W: www.cnpbrands.com.au St Lukes, Auckland, New Zealand E: info@cnpbrands.com.au Customer Service: 0800 567 5000 F: www.facebook.com/CNPBrands I: @cnp_baby...