Advertisement
Assembly / Operating Instructions
Assemble Handle
1.
Ensure the bottom of the handle lines up with the bracket.
The bracket should be on a 45 degree angle before the
handle is inserted.
2.
Push down handles until the pop pins either side of the frame
click into place.
Unfolding the stroller
1.
Push lever to the side to whilst simultaneously squeezing the
handle lock located in the centre of the handle.
2.
Pull the handle up to open the stroller unit. Pull in a short
sharp motion to ensure the stroller locks into the open
position.
08
Ensure this sits at a 45 degree angle
Assembly / Operating Instructions
Folding the stroller
1.
Before folding the stroller, close the hood and place seat in full
lay back position and transfer handle to forward facing mode.
Push lever to the side to whilst simultaneously squeezing the
handle lock located in the centre of the handle.
2.
Push the handle forward to collapse stroller unit. Push down
until the stroller frame clicks into a locked position.
09
Advertisement
