Advertisement
Assembly / Operating Instructions
Reversing handle
1.
To reverse handle, pull up on both handle reverse levers situated
on each side of handle.
2.
Reverse handle and lock it into position.
Inserting the bumper bar
1.
Align bumper bar ends with slots on the arm rest of the stroller
frame. Push in the push pins then slide both bumper bar ends
until it clicks into place.
2.
To remove bumper bar, push each button located on the side of
armrest area and pull bumper bar out.
10
Handle reverse lever
Assembly / Operating Instructions
Attaching the canopy
1.
Line up the canopy with the frame as per image. Push into the
frame until both sides click into place and are secure.
2.
Ensure press stud buttons are
secure. These are located on the
underside of the canopy.
Removing the canopy
1.
Push in both button's simultaneously, located on the inside
where the canopy is inserted. Pull canopy out of tubing.
Push in button
11
Advertisement
