Utility Box Light; Iilluminating Logo - TVS iQUBE Manual

2. Use the USB, if approved standard USB
cable used for charging mobile.
3. Do make sure the flap is not damaged while
opening / inserting the USB cable.
DON'Ts
1. Do not leave the USB charging flap open /
partially closed.
2. Do not attempt to use / charge any other
device, other than mobile phones. Only one
mobile phone should be charged at a given
time.
3. Do not try to force the USB connector in,
check whether it is inserted in the
appropriate direction, to prevent the
damage to the charger.
Caution
Ÿ
Care should be taken not to attach the
luggage which hangs out of your scooter.
Please note that the luggage attached to
your scooter should not interfere your feet
movement.
Ÿ
The charging time of the mobile may vary,
depending on the mobile's battery state of
charge. The rubber flap in the unit has been
designed to prevent water entry and is not
replaceable. No warranty for charger in case
of rubber flap cut.
19
A

UTILITY BOX LIGHT

Utility box light illuminates the utility box and
enhance visibility inside the box when it is
opened during the ignition key ON condition.
Caution
Ensure that the utility box light glass is not
damaged while accessing the utilities. Do not
slam / forcefully close the seat as it may
permanently damage the utility box light
switching mechanism.

IILLUMINATING LOGO

Illuminating logo will display the vehicle type
name as 'ELECTRIC' during the vehicle in zero
speed conditions. During charging of the
vehicle, illuminating logo will blink. The LED
color of the illuminating logo is Blue.
Illuminating logo is mounted on the swing arm
cover as shown above.