Technical Details - bplan Pegasos II Instruction Manual

TECHNICAL DETAILS

The Pegasos is a MicroATX form factor motherboard for PowerPC G3 and
11
G4 processors. The processor sits on its own interchangeable CPU module
card which allows for very simple upgrading. The speed of your computer
can be upgraded by only changing the CPU card.
For the Pegasos bPlan uses the high-performance Marvell Discovery
11,
System Controller featuring an internal bandwidth of 100 Gigabit per
second. DDR RAM (Double Data Rate Random Access Memory) support is
provided as well as two on-board ethernet controllers. The first delivers 1
Gigabit per second for high-speed networking and the second offers an
additional 100 Megabit per second for standard performance.
Also, three Firewire ports are included (2 external, 1 internal) for connecting
high-speed peripherals. There are
the AGP slot). These allow for the connectioff'of rna��a � 8 � riPherals
such as Mouse, Keyboard, Printer, Digital Camera, etc.
Pegasos has two dual channel ATA 100 connectors for attaching a total of
11
four IDE devices, such as harddisks, CDROM drives, DVO drives, CD/DVO
burners, etc.
Standard AC97 Audio is supported providing a variety of CD quality audio
ports. Additionally, there is digital audio output via the SPDIF port.
Pegasos has three PCI expansion slots. One of these can be fitted with a
11
Riser Card. Also, an AGP (1X) slot is provided for graphics cards. The Pegasos
board supports the AGP 2.0 standard so most AGP1 x and AGP2x cards will
work. In order to be sure, check if the voltage of your card is 3.3V.
Otherwise, your card will not fit physically.
Pegasos 11 also supports the following ports: Floppy drive connector, Serial
Port, Parallel Port, two PS/2 ports and a Game Port.
4
�§"B
� rts
11
1 internal, 1 on
0