eIVP1300 AI Mobile NVR
To install a 2.5" SSD:
1. Make sure the NVR is power-off.
2. Unscrew the four screws on the rear panel and then remove the cover from the housing.
3. Screw the SSD to the lower housing cover using the supplied SSD Screws. Find the SATA cable
inside the NVR, and connect the SATA cable to the SATA port on the SSD.
4.
Screw the housing cover back to the NVR.
2.1.1 Storage Compatibility List
Please go to the product page (Download) on EverFocus' Website
www.everfocus.com.tw
to see
the latest Storage Compatibility List. It's recommended to use the storage models listed on the
Storage Compatibility List to ensure your storage devices are compatible.
6