3.2 AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic system
configurations, which is stored in the batter y-backed CMOS RAM and BIOS NVRAM so that the
information is retained when the power is turned off.
To enter BIOS Setup, press <Del> or <F2> immediately while your computer is powering up.
The function for each interface can be found below.
Main – Date and time can be set here. Press <Tab> to switch between date elements
•
Advanced – Enable/ Disable boot option for legacy network devices
•
Chipset – For hosting bridge parameters
•
Boot – Enable/ Disable quiet Boot Option
•
Security – The setup administrator password can be set here
•
Save & Exit –Save your changes and exit the program
•
3.3 Setup Submenu: Main
Press the "Delete" key to enter the setup page.
9
eIVP1300 AI Mobile NVR