Camera Setup - Dahua HWS800A User Manual

4.3.2 Camera Setup

The camera setting interface is shown as below. See

Frame interval: Time interval to trigger the second snapshot in one group of snapshot.

ANPR no.: Set ANPR snapshot number and enable, 1~2 optional.

Under speed no.: Set under speed snapshot number and enable, 1~3 optional.

Speeding no.: Set over speed snapshot number and enable, 1~3 optional.

Day/night mode: There are three modes as brightness switch, color, B/W. When you select
brightness switch, it will detect the environmental brightness to confirm color or B/W mode.
Figure 4- 8
Figure 4- 9
.
20