Sys Configuration; Radar Setting - Dahua HWS800A User Manual

The road monitoring interface is shown as below. Here you can view vehicle real-time driving
status. When you are debugging the system, you can go to the following figure to view the
Figure 4- 5
camera effect. See
 Brightness: Please click "-" and "+" button to adjust the brightness. The value ranges from 0
to 100. The default value is 50.
Contrast: Please click "-" and "+" button to adjust the contrast. The value ranges from 0 to

100. The default value is 50.

Manual: Click it to snapshot current video and save it to the special storage media.

4.3 Sys Configuration

4.3.1 Radar Setting

The radar setting interface is shown as in 错误！未找到引用源。.

Radar Mode: Set radar snapshot mode, there are three modes available:
 Headstock, only snapshot head.
 Tailstock, only snapshot tail.
 Both, snapshot both head and tail.

Sensitivity: Here is to set radar sensitivity. There are four levels. The fourth level has the
highest sensitivity. The default setup is level 3.

Radar mode: Set to enable/disable vehicle model differentiation.

Radar Measurement: Set to enable/disable radar lane differentiation.

Lane adjust ratio: Adjust vehicle lane recognition accuracy, range 1~20, default is 10.
.
Figure 4- 5
17