Operation; Boot Up And Shut Down; Boot Up; Shut Down - Dahua HWS800A User Manual

4 Operation

4.1 Boot up and Shut down

Before your operation, please make sure all cable connections are right and the Lithium battery
has inserted in the slot.

4.1.1 Boot up

Push the power button in the side panel, you can see the red power indication light becomes on.
The system is booting up now.

4.1.2 Shut Down

Push the power button in the side panel; you can see a dialogue box: System is shutting down
now... The system shuts down after five seconds.

4.2 Menu Operation


All of following settings menu must be saved into force after confirmation, otherwise it is set
invalid.

After restore the default configuration parameters, you must click Save to confirm effect.

All pictures and videos can be displayed in the interface, you can click on the image / video
in a point, regional enlargement operation

After picture / video entering zooming mode, and then click on any point of the display area,
restored to thumbnail mode.

4.2.1 Login Interface

After system booted up, it goes to the login interface. See
There are three default accounts:

User name: admin. Password: admin.

User name: 888888. Password: 888888.

User name: 666666. Password: 666666.
Figure 4- 1
.
13