Help; Help Screens; Main Screen Help; Preset Help - Redback A 4480B Operating Manual

Redback® A 4480B 8 In to 8 Out Audio Switcher

Help

7.0 HELP

7.1 HELP SCREENS

Pressing the help button on any screen will provide a quick guide to the selected option/screen. The following is a tran-
script of each help option available on the A 4480B.
7.1.1 Main Screen Help Page
This screen sets the input/output matrix. Labels on the left are the output zones. Labels on the top are the input sources.
Pressing the zone buttons will change the input to that zone eg: pressing button 1 will change the input to zone 1. Con-
tinuing to press button 1 will cycle through all the inputs to the OFF position, then back to input 1 and so on.
The paging console settings shown on the right of the LCD are covered in the PA ON/OFF help page.
7.1.2 Preset Help Page
CREATE A PRESET
To create a preset, set your input to output configuration on the main screen. Press preset button to enter preset page. To
save your settings into preset 1 hold button 1 on the left until told to let go. To save preset 2, repeat with button 2 etc.
LOAD A PRESET
To load a preset, press button 1 to load preset 1. Press button 2 to load preset 2.
LABEL A PRESET
To label a preset, exit this screen and plug in keyboard. Follow the prompts.
7.1.3 PA ON/OFF Help Page
The PA microphone can be disabled from a zone ie: paging will be blocked to that zone if it is set to OFF.
To toggle the PA ON or OFF to a zone, press the button number for the zone eg: if you want to toggle zone 1 ON or OFF,
press button 1.
34 Redback® Proudly Made In Australia www.altronics.com.au