Features; Dip Switch Settings - Redback A 4480B Operating Manual

8 in to 8 out audio switcher
Table of Contents

Advertisement

Redback® A 4480B 8 In to 8 Out Audio Switcher
A 4931 DIP SWITCHES
The A 4931 has a set of DIP switches on the rear which determine how the VOX (voice operated switch) priority functions.
The DIP switches are labelled 1) VOX BOTH, 2) VOX ENABLE, 3) VOX OUTPUT.
Dip switch 3 when set to ON, activates the VOX function. If this switch is in the OFF position the audio from the A 4931
will only override the A 4493 Input Source Wall Plate if the "Local Input" button has been selected on the A 4493 (see
section 6.0 for details). In this mode the Mic and AUX/Music input from the A 4931 will be mixed - there is no priority.
If DIP switch 3 is set to ON then the following VOX priorites result from DIP switches 1 and 2 without the need for the
"Local Input" button to be selected on the A 4493 Input Source Wall Plate.
DIP Switch 1 set to ON: The Mic and AUX/Music input will mix together and either will activate the VOX circuit. The audio
from the A 4931 will then override the A 4493 zone input audio source.
DIP Switch 2 set to ON: The Mic only will activate the VOX circuit and mute the AUX/Music input if used.The audio from
the A 4931 will then override the A 4493 zone input audio source.5.4
A 4476 PRESET SELECTOR WALL PLATE
The A 4476 wallplate is used to provide local access to presets programmed into the A 4480B. The presets are displayed
on the LCD and can be cycled through by pressing the program preset button. The A 4476 may be connected to either
paging console input or any zone wallplate input on the A 4480B.
A 4476 Connections
1

Dip Switch Settings

Do not adjust. leave in default setting.
2
RJ45 Connection
Cat5e provides power to the wallplate and routes preset information to the A 4480B
3
Do not adjust.

5.4.1 Features

• Remote preset selection
• Cat5e connection
• LCD indicates presets available
5.4.2 DIP Switch Settings
In the current version of the A 4476, the DIP settings are not required for setup. Leave in default setting.
32
Redback® Proudly Made In Australia
1
2
REAR VIEW
Peripheral Connections
3
www.altronics.com.au

Advertisement

Table of Contents
loading

This manual is also suitable for:

A 4481A 4476A 4931A 4931vA 4932A 4493

Table of Contents