Baseline 300 Safety Instructions, Set Up Instructions, Operation Instructions, Maintenance Instructions page 9

CAUTION
Replace any damaged or missing safety
decals. They are available from Hennessy
Industries, Inc., (800) 688-6359.
Pressure Safety Valve — The high pres-
1
sure safety valve is set to exhaust at line
pressures above 185 PSI.
Air Inflation Gauge — Registers tire
2
pressure when clip-on chuck is attached
to tire valve stem and inflation pedal is
released.
Tower — Support for horizontal and
3
vertical slides, also air storage tank.
Important Safety Decal — Important
4
safety information for the operator. DO
NOT obstruct with tire stickers or other
materials.
Inflation Pedal — Three-position pedal
5
that allows inflation of tires through air
hose and clip-on chuck.
Bead Sealing Nozzles — Expands tire
6
sidewall to bead seat area of rim to seal
tire to rim and allow inflation.
Clamps — Holds wheel to table top for
7
tire changing. Position outward to allow
outside clamping of wheels.
Table Top — Rotating chuck for tire
8
changing.
DuckHead Mount/Demount Tool —
9 ®
Mounts and demounts tire from wheel.
Swing Arm Adjustment Knob — Adjusts
10
swing arm/vertical slide assembly for
proper horizontal positioning of mount/
demount head.
Bead Loosener Handle — Controls
11
operation of bead loosener shoe.
Lube Bottle — Dispenser for rubber
12
lubricant.
Important: Always read and follow operating instructions.
Clamp Control Pedal — Three-position
13
pedal that opens, holds or closes rim
clamps.
Bead Loosener Control Pedal — Con-
14
trols operation of bead loosener shoe.
Table Top Pedal — Three-position
15
pedal that controls rotation of table top
(forward, off, reverse).
Bead Lifting Tool — Used to lift and
16
position tire bead correctly on Duckhead
mount/demount tool.
Tire Bumper Guards — Provides pro-
17
tective surface when bead loosening tires.
Bead Loosener Shoe — Pivoting shoe
18
for loosening tire beads.
Vertical Slide Locking Handle — Locks
19
and unlocks vertical slide and sets correct
vertical position to maintain tool/wheel
clearance.
Robo-Assist™ Helper Arm — Provides
20
extra leverage when mounting/demount-
ing tires.
Helper Arm Control Valve — Controls
21
vertical movement of helper arm cylinder.
®
• 7