Table of Contents
Advertisement
Rim Clamp
For servicing single piece automotive and
most light truck tire/wheel assemblies.
Model 300 Shown
See
RIM Safety
page 3
Operating
Instructions
on page 8.
Safety Instructions
Set Up Instructions
Operation Instructions
Maintenance Instructions
Tire Changers
®
Model 500 Shown
READ these instructions before
placing unit in service. KEEP these
and other materials delivered
with the unit in a binder near the
machine for ease of reference by
supervisors and operators.
Manual Part No.: 85610373 00
Revision:
01/16
Advertisement
Table of Contents
Need help?
Do you have a question about the 300 and is the answer not in the manual?
Questions and answers
Very little pressure when clamping inside of rim on table
Very little pressure when clamping a Baseline 300 inside a rim on a table could be caused by improper inflation gauge operation, incorrect inflation pedal positioning, or issues with the air supply. It may also result from damaged or misaligned clamps, air leaks, or improper maintenance of the machine. Checking for proper air pressure, inspecting the clamps, and ensuring all components are in working order can help resolve the issue.
This answer is automatically generated