Baseline 300 Safety Instructions, Set Up Instructions, Operation Instructions, Maintenance Instructions page 28

Rim clamp tire changers for servicing single piece automotive and most light truck tire/wheel assemblies
Table of Contents

Advertisement

READ...
Mounting
and
ing the wrong size tire
can get you hurt. Read
the size on the tire and
make sure it matches the
rim. Be especially careful
about putting a smaller
tire on a larger rim, such
as a 16-inch tire on a 16.5-
inch rim.
Inflation of a mismatched
tire and rim can cause an
explosion.
1. Damaged Bead or
Beads.
2. Rusty Wheels.
(particularly in the
bead seat area)
3. Bent or Cracked
Wheels.
FAILURE TO READ AND FOLLOW ALL WARN-
INGS AND INSTRUCTIONS IN THIS MANUAL
CAN LEAD TO SERIOUS PERSONAL INJURY
OR DEATH TO OPERATOR OR BYSTANDER.
THE OWNER IS RESPONSIBLE FOR MAIN-
TAINING THE OPERATION INSTRUCTIONS
AND DECALS FOR OPERATOR REFERENCE.
FOR ADDITIONAL COPIES, CONTACT HEN-
NESSY INDUSTRIES, INC., 1601 J.P. HEN-
NESSY
DRIVE,
37086, (800) 688-6359.
85610373 00 01/2016
O
W
NE
ORD
R.I.M.
READ
INSPECT
INSPECT...
inflat-
Before you put any tire
on a rim, Inspect the rim
for rust, tough spots, bent
edges, or cracks that
could prevent the tire from
seating right. If you spot
any of these problems,
don't mount the tire until
the rim has been checked
by your shop foreman.
Inspect the tire for bead
damage.
BE CAREFUL OF THESE SITUATIONS:
4 A. Mismatched.
(A mis-match of a
16-inch tire to a 16.5-
inch rim causing an
explosion)
4 B. Mismatched.
(16.5-inch tire on a
16-inch rim)
(Read, Inspect, Mount)
Remember R.I.M.
LAVERGNE,
TENNESSEE,
© Copyright 2015 Hennessy Industries, Inc.
F
S
OR
AFETY
MOUNT
MOUNT...
Once you've made sure the tire is
OK and the right size and the rim is
OK, Mount the tire safely. NEVER, ever
lean over the tire when you're inflat-
ing it. If a tire does explode, it will go
straight up. You don't want to be over
the tire if that happens. Also, never
over-inflate the tire, even if the bead
doesn't seat. Never inflate over 40 PSI.
If the tire hasn't seated, something is
wrong. Deflate the tire and check it
and the rim again. If it doesn't work
the second time, try another tire.
5. Walk-In Tire and
Rim.
6. Back Injuries.
7. Hand or Finger
Injuries.
(Hands or fingers too
close to inflating tire
or bead seats which
may cause injury.)
for every tire.
TIRE FAILURE UNDER PRESSURE IS HAZ-
ARDOUS! This tire changer Will Not Restrain
Exploding Tires, rims or other related
equipment.
TIRES
CAN
EXPLODE,
INFLATED BEYOND SPECIFIED LIMITS. DO
NOT EXCEED TIRE MANUFACTURERS REC-
OMMENDED AIR PRESSURE.
AN EXPLODING TIRE, RIM, OR BEAD SEAT-
ING EQUIPMENT MAY PROPEL UPWARD
AND OUTWARD WITH SUFFICIENT ENERGY
TO CAUSE SERIOUS INJURY OR DEATH TO
OPERATOR AND/OR BYSTANDERS.
8. Standing Clear.
(Never put any part
of your body over the
tire changer during
inflation.)
9. Beads will not
Seat at 40 PSI.
10. Improper
Inflation.
ESPECIALLY
IF
All Rights Reserved.

Advertisement

Table of Contents
loading

Related Products for Baseline 300

This manual is also suitable for:

500

Table of Contents