Change Bands And Memory; Changing Display/Weather Alert; Lock Switch - C. Crane CC Pocket Instruction Manual

Radio Identification
Front View
7. Change Bands and Memory Pages
Press and release the BAND button to cycle between FM, AM, and
Weather. The BAND button can also be used to access station
memory pages. This gives you 20 additional presets each for AM
and FM. Press and hold the BAND button for 2 seconds to change
page numbers, press any memory button 1-5 to select the Page
number that you desire. Each page can hold five additional station
memories.
8. Change Display / Weather Alert Button
While listening to the radio, press the ALERT button once to view
the frequency or time. To activate the NOAA Weather Alert, press
and hold this button for more than 3 seconds. Continue holding to
select how long the alert will be activated for (4hr, 8hr, and 16hr).
Release the button to make your selection. While weather alert is
activated, AM and FM will be disabled because of chip limitations.
The display light will flash once every few seconds to remind you
that the NOAA Weather Alert is "ON". To turn the alert "OFF", hold
the ALERT button for three seconds until "OFF" is displayed and
beep is heard, then release the button.

9. Lock Switch

Slide the switch up to disable all buttons. Slide the switch down to
enable all buttons.
CC Pocket Radio
Right Side View
Page 9