Installing The Batteries - C. Crane CC Pocket Instruction Manual

Getting Started

INSTALLING THE BATTERIES

1.) Position the radio face down on a soft surface to protect it.
2.) Remove the battery cover using your fingernail or small tool.
Press and lift the area indicated below.
3.) Insert the two (2) "AA" Alkaline or Rechargeable (NiMH)
batteries into the compartment as indicated. (Do not use
Lithium batteries). Be sure the negative (-) end of each
battery is against the spring.
4.) Replace the battery cover. You are now ready to operate your
radio.
Page 6
Insert two (2) "AA"
Alkaline or
Rechargeable (NiMH)
batteries.
(Do not use
Lithium batteries).
To open battery
compartment, push
in direction of arrow
and lift.
CC Pocket Radio