Using Your Electric Blanket; Controls - Russell Hobbs RHESB6001 Manual

USING YOUR ELECTRIC BLANKET

Controls

Note: On initial use it is recommended that the blanket be set on
setting '3' for 1-2 hours before sleeping on the bed and then set
to setting '1' for continuous use. Preset on '3' will assist in drying
out any moisture which has been accumulated in the mattress.
Note: You may notice an odour when using the blanket for the
first time, due to the insulation material. This is harmless and
will subside quickly.
The control has Braille markings, which allows for easy
temperature adjustment in the dark.
The settings are:
0 - OFF
1 - Gentle Heat
2 - Medium Heat
3 - Pre-heat - this setting is recommended
for Pre-heating the bed 1 to 2 hours before
use with standard bedding. DO NOT SLEEP
WITH YOUR BLANKET ON THIS SETTING.
There is an enclosed red light which illuminates when the blanket
is switched on.
Page 8