Mono Mode And True Wireless Mode (Tws) - NGS ARTICA FREEDOM User Manual

ENGLISH
Pairing earphones with Bluetooth devices
Prior to using the eaphones for the first time, you have to pair
it with a Bluetooth-enabled device. The pairing procedures
are subject to different models of cell phones. Please refer
to your cell phone user's manual for further information. The
general pairing procedures are as follows:
• Please keep the headset and mobile phone within 1 meter
when pairing
• Make the headsets enter pairing mode (please refer to
"How to entering pairing mode")
• Activate your mobile phone's Bluetooth function and
search Bluetooth devices within available range, and select
"NGS ARTICA FREEDOM" from the list of devices shown
after search
• After connect sucessfully, the blue light on the headphones
flashes twice every four seconds
MONO MODE AND
TRUE WIRELESS MODE (TWS)
The main earphone is the left one. In TWS mode, the left
earphone connects to your mobile and the right earphone
connects to the left earphone.
Sometimes, if you only turn on the right earphone and
synch it in mono mode to a mobile device, the next time you
use them, they will both be in mono mode and not TWS. To
reconnect them, simply follow these steps:
1. Place the earphones in the charging base and turn on the
base. The earphones will start charging with the red light
on.
2. Remove the earphones from the base. They will turn on
automatically.
3. Press and hold the buttons on both earphones for about
thirty seconds. After six seconds, they will turn off. After
twenty-five seconds, they will light up and the message
'pairing' will be heard. Then you can release the buttons
and turn on the earphones again. They will be in TWS
mode.
5