Troubleshooting Guide - Life Smart LS-TCED-IC2 Manual

Problems Explanations
1
Power Power cord is not plug-in
indicator
light not on
The fuse is burned out
2
Function The corresponding indicator
indicator light is
light not on broken or burned out.
The wiring or some electronic
component in the circuit has
failed
3
Infrared The heater is broken
Heater will
Its life will be shortened
not heat up gradually from excessive use.
The fuse is burned out.
The wiring connection for the
heater is loose or in the wrong
location.
The circuit board is not
functioning.
4
Sauna room Problem with heater.
not
Incorrect setting on control
maintaining
panel
correct
The temperature sensor wire
temperature
may be loose or broken.
5
Peculiar Circuit problems (broken
burning component, short circuit, failure
smell of controlling
system) causing the burning of
some component in the
electrical system
6
The light not The light bulb is burned out.
working Replace light
The bulb is not secured in the
base
The socket is broken.
Problems with electrical control
panel.
7
No sound or The speaker is broken or
poor speaker isloose
sound from
The wire connection is loose
speakers
CD-player is not turned on.
CD-player is not functioning

Troubleshooting Guide

24
Solutions
1. Check for power to the outlet.
2.Check connection between power
cord and main control unit.
Check or replace the fuse.
Repair or replace the control
panel.
Repair or replace what has failed in that
circuit.
Replace with a new heater of the
same specifications.
Check or replace the fuse.
Check it, and reconnect tightly.
Check power output on the circuit
board
See Item #3.
Reset it.
Check sensor wire connection and
condition. Check to see if sensor head is
visible inside the sauna room.
1. Unplug sauna, check the voltage.
2. Find the objects with problems
3. Replace the parts
Replace light bulb.
1.Make sure the bulb is tight enough
to make good contact in the light
fixture.
2.Check the lighting protection fuse.
Replace it.
Check or replace the panel.
1.Check speaker wire.
2.Check speaker
Check connectors to be sure they make
good contact
Turn on the CD-player.
1.Check faceplate contact on the
CDplayer.