Things To Know - Life Smart LS-TCED-IC2 Manual

Infrared sauna system
Table of Contents

Advertisement

19

Things To Know

1. Set up the desired session temperature and time using the control panel.
( suggested 100℉-130℉)
2. Allow approximately 15 to 20 minutes for the sauna to warm up before
beginning a session.
3. Recommend sauna session use is around 30-45 minutes.
4. The heaters automatically maintain the desired temperature inside the
sauna
5. The ceiling vent can be opened at any time to for air circulation.
6. Always drink plenty of water before, during, and after a session. Doing
so will replenish lost fluids from the body through perspiration.
7. Take a hot shower or bath prior to the sauna session will further
promote perspiration. However, dry off thoroughly before going into the
sauna because excessive water will stain or warp the wood. A shower
after the session is refreshing and rinsing perspiration from the body.
8. To absorb perspiration and keep the sauna tidy during the session,
place a towel on the bench and floor of the sauna. Keep one towel handy
to wipe excessive sweat from your body.
9. The interior wood is aromatic and adds to the enjoyment of your sauna
session. If you feel the odor is too strong during the first few months of
usage, you can wipe the wood with a damp cloth to minimize the odor.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ls-tced-ic3Ls-tced-icc3

Table of Contents