Life Smart LS-TCED-IC2 Manual page 16

<7>INSTALLING BENCH HEATER PANEL & PLUGIN THE CABLE
Slide down the bench heater panel by lining up its sides with the vertical
guides on left side panel .
NO.1 : The heater grill is facing outwards (towards the front of the sauna)
NO.2 : Push the bench heater panel all the way down until it is touching
the bottom panel and securely in place.
<8>INSTALLING THE BENCH
1. Install the bench by sliding it over the horizontal bench guides on the
side panels.
2. Push the bench all the way in until it can touch the back panel and is
securely in place.
3. Make sure of the bench position so that the smooth and finished side of
14
NO.1 : Connect the plug of the bench heater to
connector A and make sure they are tightly
connected.
NO.2 : Connect the plug of the floor heater to
connector B and make sure they are tightly
connected.