Table of Contents
Advertisement
DSC menu (Direct Software Control)
Blaupunkt's exclusive Direct Software Control Menu has many unique features that allow you to
customize the unit to your needs and preferences.
Using the DSC menu:
1. Press MENU for 2 seconds to access the DSC menu mode.
2. Press the
/
controls to scroll through the DSC menu.
3. Use
or
to change menu settings.
4. After 8 seconds or by pressing the MENU button the unit exits from the DSC menu. All
changes are stored when leaving the DSC menu manually or automatically.
Turn-on message activation ("MSG ON"/"MSG OFF")
Press
or
to turn the message on or off.
Turn-on message programming ("MSG ENTR")
The unit can scroll a 40-character message across the display at the time of turn-on. To create
your own message:
1. Press the
button. Eight hyphens appear with the first one blinking.
2. Press
/
to select the desired characters. If you want to put a blank space in name,
select "_".
3. Press
to locate the next character.
4. After the eighth character (the farthest right character) is completed, the first (left-most)
character of next group of eight characters begins to flash. After the fifth group of eight
characters, pressing
5. Press AUDIO to store the turn-on message and to store the message.
Clock adjustment ("CLOCKSET")
Pressing
or
shows the blinking time. Subsequent press of
advances the minutes. Press AUDIO to adjust the minute to :00. The unit begins keeping the
time when
or
is pressed or when the DSC menu mode ends.
Tuner timer on/off ("TMR ON"/"TMR OFF")
The tuner timer allows the unit to go to a certain frequency at a certain time – from any audio
source. When the ignition is on and the unit off, the timer even turns the unit on and goes to the
specified frequency. Press
Tuner timer set mode ("TMR SET")
1. Before entering the DSC menu, tune in the radio frequency to be activated by the timer.
2. Access the DSC menu mode and scroll to "TMR SET" by pressing
3. Press
or
to enter the timer adjustment mode.
4. Select the time at which the unit should switch to this station by pressing the
adjust the hours and the
minutes to :00.
5. To store the station and the time, press MENU.
Radio Monitor ("RM ON" / "RM OFF")
Allows the radio to play during tape winding. If this feature has been activated, the RM icon
appears when a tape is in use. Press
Blank skip time ("BSKPTIME")
When the unit reaches a blank section of tape, it can automatically fast-forward to the next
recorded section. Use
begins from between 4 to 20 seconds.
Recommendation: Classical music listeners may want to specify a longer blank, so that the unit
doesn't mistake soft passages for blank spots.
will access the first group again.
or
to turn the tuner timer on or off.
button to adjust the minutes. Press AUDIO to adjust the
or
to turn Radio Monitor on or off.
and
to chose a minimum amount of blank time before blank skip
advances the hour;
or
.
button to
33
Advertisement
Table of Contents
