JVC UX-G950V Instructions Manual page 36

4
Select the repeat mode you want.
A-B Repeats a desired portion (see below).
Repeats the current title.
TITLE*
Repeats the disc (not applicable for
ALL
DVD) or programmed track.
CHAPTER** Repeats the current chapter.
TRACK** Repeats the current track.
OFF Cancels Repeat Play.
* While playing a DVD-VR, "PG" appears, and while
playing a Play List, "PL" appears.
** During Program Play and Random Play, "STEP"
appears.
5
Finish the setting.
A-B Repeat
You can repeat playback of a desired portion by specifying
the beginning (point A) and the ending (point B).
• A–B Repeat cannot be used for MP3/WMA/WAV/JPEG/
MPEG-1/MPEG-2/DivX files and some DVDs.
1
While playing, display the entire on-screen bar.
2
Select .
OFF
3
Display the pop-up window.
Dolby D
TITLE
DVD-VIDEO
3/2.1ch
TIME OFF CHAP.
TIME OFF
OFF
4
Select "A-B."
DVD-VIDEO
TIME TIME
5
Select the start point (A).
DVD-VIDEO
TIME TIME
33
14 23 TOTAL TOTAL 1:01:58 1:25:58
TITLE 2 CHAP CHAP 3
1/3 1/3 1/3
1/3 1/3 1/1
Dolby D
T
3/2.1ch
OFF OFF CHAP.
A–B
Dolby D
TITLE TITLE 2 14 CH C
3/2.1ch
1/3
A- CHAP. 1/3
6
Select the end point (B).
A-B Repeat starts. The selected
portion plays repeatedly.
• You can search for the end point
using the ¡ button.
To cancel A-B Repeat, repeat steps 1 to 3, and select
"OFF" in step 4.
• A-B Repeat will also be canceled when you stop play or
skip the chapter or track.
Time Search
You can move to a particular point by specifying the
elapsed playing time from the beginning.
• This function is not available during Program Play and
Random Play.
1
While playing (without PBC for SVCD/VCD), display
the entire on-screen bar.
• Time Search can also be used before starting playback
(not applicable for DVD Video/DVD-VR).
2
Select .
3
Display the pop-up window.
Dolby D
TITLE
DVD-VIDEO
3/2.1ch
TIME TIME OFF OFF CHAP.
TIME _ : _ _ : _ _
4
Enter the time.
You can specify the time in hours/minutes/seconds.
Examples:
To move to a point of 1 (hours):
02 (minutes): 00 (seconds), press
1, 0, 2, 0, then 0.
To move to a point of 54
(minutes): 00 (seconds), press 0, 5,
4, 0, then 0.
• It is always required to enter the hour digit (even "0"
hours), but it is not required to enter the final zeros
(the last two digits in the examples above).
• To correct a mis-entry, press 2 to erase the last entry.
5
Confirm your entry.
The System starts playing the disc
from the selected playing time.
TITLE 2 14 CHAP CHAP 3 23 TOTAL TIME 0:00:58 1:25:58
1/3 1/3 1/3
1/3 1/3 1/1