Ryobi RBV254O Original Instructions Manual page 17

GETTING STARTED
3 A1
A B
2
A. Assemble the vacuum tubes and vacuum bag. 1. Align raised tabs on upper blower tube with the slots on
blower housing outlet. 2. Attach and tighten securely by
B. Assemble the blower tube.
turning clockwise until it clicks into place.
B3 B4
1
2
1. Depress door tab using a flat head screwdriver. 1. Align the raised locking tabs of the lower vacuum tube
2. Open vacuum inlet door. with the matching slots on the upper vacuum tube. 2. Using
a Phillips head screwdriver, tighten the two screws to
secure the vacuum tubes together.
GETTING STARTED
A2
2
1
1. Align raised tabs on upper blower tube with the slots on
the leaf nozzle. 2. Attach and tighten securely by turning
clockwise until it clicks into place.
B5
3
2
2
1
1
1. Align tabs on the housing with the vacuum tube assembly
2. Push the vacuum tube assembly onto the housing.
3. Twist to lock into place.
2
1 1
1. Align raised tabs on upper blower tube with the slots
on the sweeper nozzle. 2. Attach and tighten securely by
turning clockwise until it clicks into place.
NOTE: Ensure to attach the vacuum tubes securely to the
blower/vacuum housing.
GETTING STARTED
A. Hold the blower with the upper handle in your right hand.
NOTE: Ensure to attach the blower tube and nozzle
securely to the blower/vacuum housing.
B
B. Place the vacuum bag strap over your right shoulder.
Hold the upper handle in your left hand and the vacuum
handle in your right hand.
A
17