Getting Started - Ryobi RBV254O Original Instructions Manual

GETTING STARTED

1
Wear full eye and ear protection, substantial footwear, and
long trousers at all times while operating the product. Do
not operate the product when barefoot or wearing open
sandals.
B1
Unzip the vacuum bag and place the adaptor inside. Push
the vacuum bag adaptor through the opening opposite the
zipper. The wider end of the adaptor will remain on the
inside of the vacuum bag when installed properly.
16
2
(50 : 1)
Pre-mix 2-stroke engine lubricant and unleaded petrol in a
clean container approved for petrol at a 50:1 ratio.
B2
1. Align the raised slots on the vacuum bag adaptor with
the raised locking tabs on the blower housing outlet; push
the bag adaptor onto the housing.
2. Twist to lock into place.
2
1