Chengdu Ebyte Electronic Technology Co,;Ltd
11.3 BER (Bit Error Rate) is high
There are co-channel signal interference nearby, please be away from interference sources or modify frequency and
channel to avoid interference;
Poor power supply may cause messy code. Make sure that the power supply is reliable.
The extension line and feeder quality are poor or too long, so the bit error rate is high;
12.Production guidance
12.1 Reflow soldering temperature
Solder Paste
Preheat Temperature min (Tsmin)
Preheat temperature max (Tsmax)
Preheat Time (Tsmin to Tsmax)(ts)
Average ramp-up rate(Tsmax to Tp)
Liquidous Temperature (TL)
Time(tL)Maintained Above(TL)
Peak temperature(Tp)
Aveage ramp-down rate(Tp to Tsmax)
Time 25℃ to peak temperature
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019,
Profile Feature
Sn-Pb Assembly
Sn63/Pb37
100℃
150℃
60-120 sec
3℃/second max
183℃
60-90 sec
220-235℃
6℃/second max
6 minutes max
E70-433T14S user manual
Pb-Free Assembly
Sn96.5/Ag3/Cu0.5
150℃
200℃
60-120 sec
3℃/second max
217℃
30-90 sec
230-250℃
6℃/second max
8 minutes max
25