Table of Contents
Advertisement
Insert the power supply cord into the upper cord wrap as illustrated (Fig 3).
Place the microfibre cloth on the bottom of the mop head, making sure all of the loops on
the cloth are aligned with the gripping hooks on the bottom of the mop head (Fig 4) Press
the cloth against the mop head so the loops on the cloth catch onto the gripping strips on
the mop head, holding the pieces together.
Note:
Never use the carpet glider on surfaces that are prone to scratching.
Caution:
Never assemble or remove the accessories while the unit is in operation.
Fig. 3
Fig. 4
Advertisement
Table of Contents
