Table of Contents
Advertisement
Round Brush & Bent Nozzle
To attach these accessories, screw them onto the straight nozzle that is connected to the
extension hose as shown in Fig. 9a & 9b (round brush) or Fig. 10a & 10b (bent nozzle).
1.
After assembling each accessory, add water to the tank up to the MAX level using
the measuring cup.
2.
Plug the steam cleaner into a power outlet.
3.
Turn the knob on the water tank to the locked position, then you can turn on the
power switch (from minimum to maximum) to choose the steam strength.
After Use
1.
Unplug the power cord from the outlet.
2.
Allow the mop pad to cool down and carefully remove cleaning cloth from the mop
head, as the cleaning cloth could still be hot.
3.
Any water remaining in the tank should be emptied before storage. Always empty
the water tank at the end of each use.
4.
Let any water (remaining as a product of condensation) drain from the steam
opening before storing the appliance.
5.
Wrap the power cord around the upper and lower cord wraps.
6.
Wipe all surfaces of the unit clean with a soft cloth. Store in a protected, dry area.
7.
Please store the unit in a cool, dry place when not in use. Do not leave it exposed to
sunlight or rain.
8.
Upright storage of the unit with a wet mop pad may result in the formation of white
marks on your floor. To remove the white marks, clean the area with vinegar. Make
sure to remove the mop pad before storage.
Fig. 9a
Fig. 10a
Fig. 9b
Fig. 10b
Advertisement
Table of Contents
