2
SETUP
–
Insert connector
–
Recharge the battery. (
101260-10
–
Remove the seat. (
–
Secure tool set
–
Remove the protective film from the seat.
–
Mount the seat. (
101261-10
–
Carefully loosen and remove the tensioning belt over the swingarm.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tensioning belts around the lower triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off of the palette.
–
Remove the protective plastic.
101262-01
–
Install the front spoiler. (
–
Refuel. (
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
–
Set kilometers or miles. (
–
Set the clock. (
into the starter relay.
3
p. 7)
p. 6)
with the rubber holder.
4
p. 6)
p. 9)
p. 10)
p. 11)
p. 11)
5