2
SETUP
–
Position the hand brake cylinder. Tighten the screws.
Guideline
Remaining chassis screws
–
Position the throttle grip. Tighten the screws.
Guideline
Remaining chassis screws
–
Mount and tighten the right handlebar weight.
Guideline
Remaining chassis screws
101256-01
–
Position the left combination switch. Tighten the screws.
Info
Position holding lug
101207-10
–
Position the clutch master cylinder and tighten the screw.
Guideline
Remaining chassis screws
101257-01
–
Mount and tighten the rear mirror adapter and rear mirror on both sides.
101258-01
–
Mount the reflector.
101259-01
M6
M5
M6
in bore
.
C
D
M6
4
10 Nm (7.4 lbf ft)
5 Nm (3.7 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)