Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for cetoni BASE 120
Summary of Contents for cetoni BASE 120
- Page 1 SYSTEM Hardware Manual – General Part ORIGINAL INSTRUCTIONS 1.01 – MAY 2020...
- Page 2 CETONI GmbH Wiesenring 6 07554 Korbussen Germany +49 (0) 36602 338-0 +49 (0) 36602 338-11 info@cetoni.de www.cetoni.de CETONI System Hardware Manual...
- Page 3 The description for the product specification in this manual does not constitute an integral part of the contract. If you control the products with software from CETONI GmbH, you agree to the applicable license agreement, which can be read in the corresponding software manual. This and all other current product manuals can be found at https://www.cetoni.de/en/downloads/manuals.
- Page 4 CETONI System Hardware Manual...
-
Page 5: Table Of Contents
Initial Start-up Unpacking and setting up the system Installing software Connecting the base module Creating a device configuration Configuring single modules Assembling the complete system and connecting it to the software Separating modules Transport and Storage CETONI System Hardware Manual... -
Page 6: Change History
Disposal Change History DATE CHANGE 1.00 15.01.2020 Initial creation of CETONI System Manual from Qmix Hardware Manual - General Part 1.01 04.05.2020 Cover image updated CETONI System Hardware Manual... -
Page 7: Introduction
Introduction Foreword Thank you for choosing a CETONI product. With this user manual we would like to support you in handling the CETONI products and devices. If you have any further questions or suggestions, please do not hesitate to contact us directly. -
Page 8: Norms And Guidelines
The CETONI system is a modular system of different devices for performing various processes and applications in laboratories. 2.4.2 Intended Use The devices of the CETONI system are intended for the use described in the corresponding device manuals. 2.4.3 Reasonably Foreseeable Faulty Application A use for applications distinct from the intended purpose can lead to dangerous situations and is to be omitted. - Page 9 Data", these values must be complied with. Regarding the maximum operating temperature, the specification from the section "Technical Data" must be observed. CETONI GmbH is not liable for consequences that may arise if the user expands the system by peripheral devices, such that one of the values or both values are exceeded.
-
Page 10: Measures For Safe Operation
2.4.5 Measures for Safe Operation 2.4.5.1 ELECTROMAGNETIC EMISSIONS The CETONI system is intended for use in any type of facility, connected directly to the public power supply network that supplies buildings used for domestic purposes. 2.4.5.2 ELECTROSTATIC DISCHARGE Floors should be made of wood, concrete, or ceramic tiles. If the flooring is made of a synthetic material;... -
Page 11: Warranty And Liability
CETONI GmbH considers itself responsible for the devices with regard to safety, reliability and function only if assembly, new settings, changes, extensions and repairs are carried out by CETONI GmbH or an authorised centre, and if the devices have been used in accordance with the instruction manual. -
Page 12: Initial Start-Up
Initial Start-up Unpacking and setting up the system Set up your individual CETONI devices, initially without plugging them together or connecting them to each other, on a flat, horizontal surface, e.g. table, base cabinets or equipment trolleys. You can set up the system both horizontally and vertically. - Page 13 CAUTION. Consider the reduced stability in the upright position and try to minimize the risk of overturning and place the devices at least 40cm from the edge of the table. IMPORTANT. Make sure that the ventilation slots which are present on some devices do not get covered. CETONI System Hardware Manual...
-
Page 14: Installing Software
Installing software For installation, simply start the setup file of the QmixElements software on the enclosed CD. When installing the software for the first time, make sure to also install the corresponding device drivers. CETONI System Hardware Manual... -
Page 15: Connecting The Base Module
Turn on the device with the mains switch in order to bring it into an operational condition. The power switch should illuminate when the unit is turned on. If this is not the case, check that the power connector cable is correctly plugged into both the unit and mains power supply. CETONI System Hardware Manual... -
Page 16: Creating A Device Configuration
Please connect the base module to your PC as described in the previous section. Use the supplied USB cable and the power cable. Start the software and click on Create Configuration or select Device Create Configuration ❶ from the main menu. ❷ CETONI System Hardware Manual... - Page 17 IMPORTANT. Please do not plug all modules of your setup together from the beginning as it needs to be a step by step procedure. The software carefully guides you through the configuration process of each single module on your screen. CETONI System Hardware Manual...
-
Page 18: Configuring Single Modules
After successful configuration, disconnect the device you have just configured from the base module Follow the instructions displayed on the screen as before. Repeat these steps for all other devices in this configuration. CETONI System Hardware Manual... -
Page 19: Assembling The Complete System And Connecting It To The Software
To ensure a proper contact between the modules, both modules must lie flat against each other. Avoid tilting the modules. Plug the bus terminator plug into the socket of the last connected module of your system. CETONI System Hardware Manual... - Page 20 (see figure below) in the user interface. Now your CETONI system is ready for use and you can explore the functions of the software. IMPORTANT. Always plug the Bus-terminating-plug into the socket of the last connected module.
- Page 21 IMPORTANT. Deactivate the standby / sleep mode of your PC to avoid malfunctions. IMPORTANT. In addition to this manual, please read the following manuals carefully and completely before starting up your CETONI System: QmixElements Software Manual Device manuals for all devices in your system...
-
Page 22: Separating Modules
The individual modules are held together by the two centering pins and by plug and socket of the CETONI system interface. When separating the modules, it is easy to tilt them, which can bend the centering pins and make it difficult to pull the modules apart. -
Page 23: Transport And Storage
Use the original packaging for shipping the modules. For the storage of the devices, observe the storage instructions in the corresponding device manuals. ATTENTION. Danger of damaging the device! Never transport modules while they are plugged into each other. CETONI System Hardware Manual... - Page 24 Disposal Please return your old devices to CETONI GmbH which will ensure correct disposal according to the Electrical and Electronic Equipment Act. Please decontaminate the device if necessary and include the completed Declaration of Decontamination form. CETONI System Hardware Manual...