Features And Specification; Features; Specification - TP-Link TL-SL3226P User Manual

24+2G Gigabit Managed Switch User's Guide
TL-SL3226P
2.2

Features and Specification

2.2.1 Features

Fully comply with IEEE802.3 standard
!
Full and half-duplex for both 10Mbps and 100Mbps connections.
!
Support IEEE802.3x flow control for full-duplex mode and collision-
!
based backpressure for half-duplex mode
Use non-blocking store-and-forward shared-memory architecture
!
24 10/100BaseT/TX RJ-45 ports with auto-MDI/MDIX
!
Provide 2 independent extension slots support 100/1000M module
!
card and GBIC
Support the port N-Way auto-negotiation function, automatically
!
negotiate the speed and duplex mode between two devices
Provide 6K MAC address space
!
! Support MAC address learning and aging with programmable age
time
Provide IGMP snooping function
!
Provide maximum 26 port-based VLAN and 256 IEEE802.1Q VLAN
!
Provide maximum 7 trunk groups of up to 4 member ports within 26
!
ports
Provide SNMP, Web and Telnet/Console management
!
Support SNMPv1, SNMPv2c
!
Support SNMP MIB-II, Ethernet-like MIB, Bridge MIB, TP-LINK
!
Enterprise MIB
Support RMON Statistics, History, Alarm and Event group
!
Support IEEE802.1D Spanning Tree protocol
!
Support IEEE802.1X Port-Based Network Access Control protocol
!
and connect to RADIUS
24+2G Gigabit Managed Switch User's Guide
TL-SL3226P
Support static priority and IEEE802.1p class of service with 2-level
!
priority mode
Support Static MAC address management and MAC address Binding
!
Provide the configuration function of port security, broadcast storm
!
control and port sniffer
Provide per port egress/ingress rate control function and the minimum
!
granularity is 64kbps
Provide static IP address configuration and dynamic IP parameters by
!
DHCP
Support firmware upgrade, configuration backup and restore by TFTP
!

2.2.2 Specification

Standard Compliant with IEEE802.3, IEEE802.1D,
IEEE802.1Q and IEEE802.1X
Port 24 10/100M RJ-45 ports with auto-MDI/MDIX
2 independent 100/1000M extension slots
One console port (RS232)
VLAN Mode IEEE802.1Q VLAN mode
Port-based VLAN mode
Network Medium 10Base-T: CAT 3 or above CAT 3 UTP/STP
100Base-TX: CAT 5 UTP/STP
100Base-FX: MMF, SMF
1000Base-T: CAT 5 UTP/STP
1000Base-SX: MMF
1000Base-LX: SMF or MMF
Power on
LED Power
indicator Each port Two indicators: Link/Act and 10/100Mbps
Dimension 440mm 260mm 44mm (W x H x L)
Environment Operating temperature: 0 C ~ 40 C
Storage temperature: -20 C ~ 70 C
Operating humidity: 10% ~ 90% RH
Storage humidity: 5% ~ 90% RH
Power 110-260V~ 50-60Hz
o o
o o