Connecting To Audio Video Devices - Quali-TV QS1080IR Manual

CONNECTING TO AUDIO VIDEO DEVICES

Physical Installation
There are many ways to connect the satellite receiver to your home entertainment system, depending on the
equipment and connection types you have. However, for the best video/audio quality, use the higher quality
Y/Pr/Pr, RGB, DVI and or S-PDIF connections if available.
Video Cable Types
Audio/Video (RCA) connector and cables – provide better picture quality and
stereo sound. These cables are commonly grouped with three connectors on
both ends, and are color coded as yellow –video signal, white – left signal,
and red – right audio signal. Green – Y, Red – Pr, Blue - Pb
An RGB cable provides your display with separate high quality RGB and
synchronization signals
A DVI cable allows you to supply the signal in digital format to your display.
This avoids unnecessary digital to analogue conversion of the video signal.
SPDIF connector (Fiber Optic) – deliver the decoded audio AC-3 signal
to your Dolby Digital amplifier/home cinema system.
Notes:
(a) If your TV monitor supports 1080i / 720p / 576p / 576i (PAL) video input formats, please use the receiver's
Y/Pb/Pr or RGB or DVI video output connectors to connect with the TV monitor.
Then use the V-Format key on the remote control to switch between four video output formats 1080i / 720p
/576p / 576i. Use the highest working resolution to enjoy the best picture quality.
(b) If your TV monitor does not support above video input format, please use the receiver's VIDEO output
connectors to connect with the TV monitor
11