Table of Contents
Advertisement
power for at least three seconds. It will resume the default manufacturer's setup.
LAN: Connect with your computer's NIC.
LINE(WAN): Connect to the MODEM Port of Splitter or Connecting the telephone line.
2.3
Hardware installation procedures
The procedure to install the Router can be described in general terms in the following steps:
First Step: Connect the MODEM port of Splitter with the TD-8810/TD-8810B ADSL ROUTER
LINE port by telephone line. While you need to use a telephone, please attach telephone line into
the phone of Splitter.
Second Step: Connect category 5 cable with RJ45 jacks to the ADSL ROUTER's LAN port and
your computer's NIC.
Third Step: Plug one end of the AC Power Adapter into the Power jack on the Ethernet ADSL
ROUTER and the other end to a standard electrical outlet.
Last Step: Check the line connection to see if everything is ready. Power up finally.
TD-8810
External ADSL Router User Guide
Figure 2-1
5
Advertisement
Table of Contents
