Table of Contents
Advertisement
MCT36-5 CN
Continued from the previous page.
It is recommended that each set of work passes be at 90° to the previous set of
work passes. This will help prevent the creation of valleys in the slab surface.
For example, in the illustration, the second set of work passes (2) is 90° to the first
set of work passes (1).
WARNING
Personnel other than the trowel operator should not be allowed in the work area,
as severe injury can occur from contact with operating trowel blades.
Do not attempt to clean, service or perform adjustments on the trowel while it is
running.
wc_tx004557en.fm
a
c
b
1
2
27
Operation
d
wc_gr014739
Advertisement
Table of Contents
