Husqvarna Wacker Neuson MCT36-5 CN Operator's Manual page 24

Operation
Continued from the previous page.
4. Turn the engine switch (j) to the ON position (k).
5. Pull the starter grip lightly until you feel resistance, then pull briskly. Return the
starter grip gently.
NOTICE: Do not allow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter.
6. If the choke lever (m) has been moved to the CLOSED (n) position to start the
engine, gradually move it to the OPEN position as the engine warms up.
7. Adjust the throttle lever the desired position to set the engine speed.
j
k
wc_gr014546
wc_gr014547
m
n
wc_gr014548
24
MCT36-5 CN
wc_tx004557en.fm