Husqvarna Wacker Neuson MCT36-5 CN Operator's Manual page 10

Safety Information
Only operate the machine when:
Safety
devices,
All safety devices and guards are in place and in working order.

controls, and
All controls operate correctly.

attachments
The machine is set up correctly according to the instructions in the Operator's

Manual.
The machine is clean.

The machine's labels are legible.

To ensure safe operation of the machine:
Do not operate the machine if any safety devices or guards are missing or

inoperative.
Do not modify or defeat the safety devices.

Only use accessories or attachments that are approved by Wacker Neuson.

When operating this machine:
Safe
operating
Remain aware of the machine's moving parts. Keep hands, feet, and loose

practices
clothing away from the machine's moving parts.
Do not operate a machine in need of repair.

Do not consume the operating fluids used in this machine. Depending on your

machine model, these operating fluids may include water, wetting agents, fuel
(gasoline, diesel, kerosene, propane, or natural gas), oil, coolant, hydraulic fluid,
heat transfer fluid (propylene glycol with additives), battery acid, or grease.
Wear the following Personal Protective Equipment (PPE) while operating this
Personal
machine:
Protective
Equipment
Close-fitting work clothes that do not hinder movement

(PPE)
Safety glasses with side shields

Hearing protection

Safety-toed footwear

10
MCT36-5 CN
wc_si001081en.fm