Radio Operation; Switching To The Radio Mode; Selecting Wavebands/Memory Banks; Tuning Into Radio Stations - Blaupunkt SANTA MONICA CD30 Operating Instructions Manual

RADIO OPERATION

Radio operation

Switching to the radio mode

If you are currently using the CD player
or CD changer,
press CD•C 8 repeatedly until
"RADIO" appears in the display.
Selecting wavebands/memory
banks
Using this car audio system, you can
tune into radio stations on the FM and
AM wavebands. There are three mem-
ory banks for the FM waveband and one
memory bank for AM. You can store five
stations in each of these memory banks.
Selecting FM
To switch between the FM wave-
bands FM1, FM2 and FMT, press
FM 2.
Selecting AM
To switch between the AM wave-
band, press AM 6.

Tuning into radio stations

You can tune into radio stations in a
number of different ways.
Automatic seek tuning
Press or
The radio will tune into the next availa-
ble station within reception range.
10
:.

Adjusting seek tuning sensitivity

It is also possible to adjust the sensi-
tivity of the seek tuning function. In this
way you can adjust the radio to tune into
stations with strong reception signals
only, or to those with weaker reception
signals as well.
Press MENU <.
: repeatedly until
Press
"SENS" appears in the display.
:.
Press
The currently selected setting will ap-
pear in the display. "SENS HI" indicates
the highest level of sensitivity, "SENS
LO" the lowest. If you select "SENS LO",
lo will light up in the display.
: to adjust the desired
Press
sensitivity.
Once you have made your selec-
tion, press MENU <.
Manual station tuning
You can also tune into radio stations
manually.
Press or

Storing radio stations

Storing radio stations manually
Select the desired FM memory
bank FM1, FM2, FMT or the AM
waveband.
Tune into the radio station you
would like to store.
:.