Huawei FusionServer Pro 2488H V5 Technical White Paper page 26

Huawei FusionServer Pro 2488H V5 Server
Technical White Paper
9
Port Description
Table 5-4 Ports on the rear panel
Port
10GE optical
port
GE electrical
port
VGA port
Serial port
Management
network port
USB port
Issue 03 (2020-04-20)
PSU sockets
Type
10GE SFP+
1000BASE-T
DB15
RJ45
1000BASE-T
USB 3.0
Copyright © Huawei Technologies Co., Ltd.
-
Quantity Description
2 10GE LOM service ports
(optical).
2 GE LOM service ports
(electrical).
1 Used to connect a display
terminal, such as a monitor or
KVM.
1 Default operating system
serial port used for debugging.
You can also set it as the iBMC
serial port by using the iBMC
command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
1 Used for server management.
NOTE
The management network port is
a GE port that supports 100
Mbit/s and 1000 Mbit/s auto-
negotiation.
2 Used to connect to a USB
device.
NOTICE
Before connecting an external
USB device, check that the USB
device functions properly. The
server may operate abnormally if
an abnormal USB device is
connected.
5 Hardware Description
-
20