Step 6 Optional Components
Installing WLAN Antennas
Please check the color-coding of the antennas. On the chassis front side the antenna bays are marked black
respectively gray .
Please note that the plastic front bezel has to be removed first.
Insert the black antenna cable in the hooks (see red circles), and then plug the black antenna cable to socket #1 of
the M.2 WLAN module. Plug the gray antenna cable to socket
Note: Consider correct installation / positioning of the antenna cables in order to avoid possible collision with the
SATA and SATA Power connector
Page 9 of 12
Push the antenna cables completely through the
opening in the housing and pay attention to the
antenna cable notch
Carefully install the WLAN antennas. The metal plate
must not be bent.
V1.1 - 07/2019