Step 7 Closing The Chassis [Updated] - Fujitsu SMARTCASE S520 Assembly Instructions Manual

Assembly Instructions SMARTCASE S520

Step 7 Closing the Chassis [updated]

Slide the cover on top of the chassis while pushing it forward.
Some pressure may be required.
Note:
As the mainboard D3664-B provides an additional
USB type-C port a different rear chassis wall is
required for SMARTCASE S520.
This chassis wall (K1056-B520) is included in the D3664-B mainboard delivery kit.
__________________________________________________________________________________________________________________________________________________________
Page 11 of 12
Close the chassis rear cover using the screws included in the
delivery kit.
V1.1 - 07/2019 www.fujitsu.com