Summary of Contents for My Water Filter TWIN BIG BLUE WHOLEHOUSE WITH UV GUARD
Page 1
INSTALLATION INSTRUCTION AND PRODUCT CARE MWF 20” X 4.5” TWIN BIG BLUE WHOLE HOUSE RAIN WATER TANK FILTER SYSTEM COMPLETE WITH UV GUARD ULTRAVIOLET LIGHT Thank You for trusting us with your Water Filtration needs. Please read and follow the steps below on setting up your Product. If you need any help, please call us at 1800-769-300 or contact us through our website at www.mywaterfilter.com.au/contacts/ or email us at customerservice@mywaterfilter.com.au...
BEFORE YOU START Things you will need: A plumber Assorted tools Elbows Drill Water pipe Thread Tape Spanner Ball valves Take some time to clear any items out of the way to ensure you have a safe, clear area to install the water filter and UV system.
Page 5
When installing outdoors, it is required to have a cover over the electrical components of the ultraviolet light system to prevent rain or moisture from seeping through the electrical components of the system, hence preventing possible causes of short circuits. This system has electrical components and must be kept dry at all times.
Page 6
EASY INSTALLATION GUIDE CLICK HERE TO WATCH THE VIDEO...
Page 7
Installation: Step 1. Assess the location where the Whole House Rain Water Tank Filter System Complete with Ultraviolet Light will be installed. Look for a desirable position where the system can be fixed securely. The whole house big blue filter system bracket has 2 x holes to attach it onto the wall.
Page 8
It is preferred that the Whole House Rain Water Tank Filter System Complete with Ultraviolet Light is mounted on a house or strong wall. If mounted onto a frame, concrete the frame into the ground securely. Ensure the whole house big blue filter system is fixed to a strong structure as it will be heavy when full of water and you need to make it strong enough to handle very bad weather conditions like cyclones etc.
Page 9
Notice: use any form IMPORTANT: PLEASE DO NOT OR YOU MUST NOT of sealant on the threads of this water filter. Please ONLY use plumbers thread tape. If you use any sealants they have a history of expanding after the water filter is connected and can crack the inlet &...
Page 10
UV SYSTEM INSTALLATION GUIDE Installation: Connect the UV chamber and all water pipes Once the whole house water filter has been installed and secured properly, assess the location where the ultraviolet light system will be installed. Look for a desirable position where the ultraviolet light system can be fixed securely.
Page 11
QUARTZ THIMBLE/SLEEVE INSTALLATION Once the stainless steel chamber is installed securely. Then insert the quartz thimble/ sleeve (using the O ring or O rings provided) inside the chamber and tighten the sealing nuts as tight as you can by hand. (DO NOT USE A TOOL OR YOU MAY CRACK THE GLASS).
Page 12
SAMPLE INSTALLATION SETUP DIAGRAM Illustration 1: UV Light System in Vertical Position with Whole House Water Filtration...
Page 13
Illustration 2: UV Light System in Horizontal Position with Whole House Water Filtration...
Page 14
Illustration 3: UV Light System in Horizontal Position with Whole House Water Filtration with dual bypass...
Page 15
Illustration 4: UV Light System in Horizontal Position above Whole House Water Filtration (ideal for locations with less space)
UV LAMP INSTALLATION Electrical Installation: Step 2: Install UV lamp and electrical components PLEASE READ: Cotton or powder-free nitrile gloves should be worn whenever handling the UV lamp or quartz in order to prevent fingerprint marking, which will detrimentally impact UV intensity. Remove the UV lamp from its protective wrapping and wipe it down with a soft cloth/tissue soaked in alcohol.
Page 17
Ensure the green earth wire (If supplied) is connected onto the chamber earth wire terminal connection and tighten securely. NOTE: For newer models, the green earth wire is already set as these new systems use a 3-way plug. NOTE: The power supply box must be mounted clear of the floor as a precaution against the ingress of water.
Page 18
ANNUAL UV LAMP REPLACEMENT & QUARTZ THIMBLE/SLEEVE INSPECTION Switch off the power to the UV system. Turn off the water supply and drain as much water out of the UV system as possible. Unscrew the three screws that secure the electrical cap onto the sealing nut.
Page 19
HOW TO CHANGE CARTRIDGES Shut off the water supply. Open a tap closest to the whole house big blue filter and allow all the pressure empty via the tap. Use the supplied housing opening tool to remove housing turning anticlockwise. Once loosened with the tool, the housing can be removed by hand.
Page 20
Remove the old filter and discard it. Make sure to note the orientation of the cartridges. Install the new whole house big blue cartridges into the filter housings. NOTE: You can do some preventive maintenance while doing the cartridge replacement. Lubricate the o-ring and housing threads with food grade silicone grease.
Page 21
Position the housing tool over the filter housing. Tighten the filter housing until firm. Do not tighten until overtightened. Do not force. Do not open the valve on the mains yet, fully open the tap nearest to the whole house water filter.
Page 22
Having Troubles with yoursystem. Call us at 1800-769-300 My Water Filter Pty Ltd...
Need help?
Do you have a question about the TWIN BIG BLUE WHOLEHOUSE WITH UV GUARD and is the answer not in the manual?
Questions and answers