My Water Filter Xstream 7 Installation Manual

)
-
REVERSE OSMOSIS INSTALLATION
7 Stage Hydrogen Rich High Alkaline
BRIEF TECHNICAL ASPECT OF THE WATER TREATMENT SYSTEM
This Water Filter Treatment System utilizes a process called reverse osmosis ( RO ) .
As the heart of the purification system , the RO process uses semi
-
permeable spiral
- wound
membranes to separate and remove dissolved solids , organic , pyrogens , sub
-
micron
colloidal particles and bacteria from water
.
Feed water is delivered under pressure at about 60
PSI through the permeator where water permeates the minute pores of the membrane and is
delivered as purified water
.
Impurities in the water are concentrated in the reject stream and
flushed to drain
.
Your newly purchased Reverse Osmosis System is capable of removing
between 90 % to 96 % of the total dissolved solids ( TDS ) , organics , and bacteria
.
Important
We suggest you read and become familiar with all instructions
,
processes , and parts prior to
proceeding with the installation
.
Please see back page for information on protection equipment
.
BEFORE YOU START :
PLEASE NOTE
-
All components that come pre
-
assembled will require tightening and
checking before installation
. Due to transit , fittings and other components may be
loosened or unseated from vibrations so please go along and check all
things
including but not limited to : Tubing , Fittings , tubing connections ( between tube and
fitting ) , O
-
rings , housings and filters
.